2018-12-15
4R as the overall policy of environmental, occupational health and safety policy,Specific content as follows:
Respect
Responsibility
Reduce
Recycle
Social and Environmental Responsibility Program
1,Comply with the requirements of the National Safety and Health Act,Taking safety as the foundation of the company, we strive to achieve the goal of zero disasters and zero injuries.
2,Implement safety, health and systems to provide employees with a healthy and safe working environment.
3,Full participation, check the important responsibility of safety and health, discover and eliminate potential hazards, and prevent accidents.
4,Promote and implement an environmental management system, establish continuous improvement of environmental performance goals, and continuously improve environmental performance through regular internal audits.
1,Pollution Prevention
Longteng Optoelectronics takes "sustainable development and caring for the environment" as its development concept.The waste water and waste pollutants produced by the company are discharged through advanced environmental treatment equipment, and the discharge standards are in compliance with national regulations. Solid wastes are sorted and stored and commissioned by qualified manufacturers.
2,Water pollution prevention
The wastewater generated by the company mainly includes acid-base wastewater, organic wastewater, inorganic wastewater (fluorine-containing, phosphorus-containing wastewater), etc.And enter different wastewater treatment systems for different properties.After the wastewater treatment reaches the third-level standard of “Integrated Wastewater Discharge Standard (GB8978-1996)” and the takeover standard of the sewage treatment plant, it is discharged into the industrial sewage treatment plant.Drain pipe simultaneously set online monitoring device,Real-time monitoring of PH, COD, BOD, SS, ammonia nitrogen, TP, fluoride ion. If there is excessive standard or abnormal condition, the wastewater will be recirculated through the return pipe network to ensure the discharge is up to standard.
3,Air pollution prevention
The process waste gas mainly has acid-alkaline exhaust gas and organic waste gas.The acid-base waste gas is treated by a packed scrubber; the organic waste gas is treated by a zeolite runner system; and the discharge can meet the relevant regulations.
4,Solid waste disposal
Solid wastes are set up in storage places, and are collected and stored in strict accordance with categories, and are commissioned by qualified manufacturers.
Develop an audit plan to check the operation of air pollution and water treatment equipment and pollutant discharges on a weekly and monthly basis, as well as check the classification, storage and treatment of solid waste, and promptly propose rectification and improvement to ensure that the dye is dyed. The control facilities are operating normally. To achieve the purpose of protecting the environment and reducing pollution and reducing emissions.
Longteng Optoelectronics has passed the DNV (Norwegian Classification Society) ISO14001:2004 system certification on February 16, 2009 and obtained the certificate.
1,Accident investigation
Longteng Optoelectronics has established a complete set of complete accident investigation specifications, including accident handling procedures, investigation mechanisms, cause analysis, strict implementation of preventive improvement measures, and requirements for third-order initiation and promotion, to prevent similar accidents from happening again, to achieve recurrence prevention and pre-fat prevention. the goal of.
2,Emergency response organization
Establish a set of emergency response measures, set up an ERC emergency response center, and prepare an ERT (Emergency Response Team) to train the use of emergency response equipment. At the same time, ERT drills are held regularly every month, including fire accident drills, chemical leak accident drills, personnel evacuation drills, and ERT members without warning assembly exercises. For all ERT members, ERT return tours are held regularly to familiarize ERT members with emergency response procedures and the use of related equipment to enhance disaster response capabilities.
3. Machine installed safety check (ESO)
In the intrinsic safety of the machine, according to the international standard of equipment safety, the ESO check is carried out before the machine is officially put into operation. Through the three-phase ESO check, we can ensure the safety of the installation and the safety measures before the equipment is put into operation, so as to reduce the safety risk of the new machine.
4. Operational Safety Analysis and Observation (JSA)
In addition to safety control for equipment, in addition to the requirements for the safety of the operation of the same staff, in addition to the requirements of the relevant operational education and training, the operation must comply with the standard operating procedures, more screening for more dangerous operations, scheduling operation observation plan, by work The staff of the security staff cooperates with the senior staff to perform the operation observation, and carries out the operation specification review, the operator education training and the improvement of the working tool equipment according to the observation record results.
5. Hazardous Chemicals Management (MSDS)
In order to enable the company's employees to understand and quickly obtain information on the nature and treatment of the corresponding chemical substances during normal maintenance operations or emergency response, the company places chemical safety instructions around the dangerous goods storage area and the machine work site. And build MSDS internal network query system to enhance employees' awareness of chemicals and emergency response to chemical spills
6. Inspection and audit
There is a well-established inspection mechanism, including daily environmental safety inspections, weekly inspections, and automatic inspections. Through specific project inspection mechanisms, we can timely identify the lack of work safety and environmental protection at the job site and management, and improve them in time. Reduce the risk of accidents.
7. Contractor Management
In order to standardize the management of contractors, the company has formulated a complete safety management norms and penalties for contractors; the contractors are required to receive general security education before they come to work in the factory, and the safety and training and on-site training will be carried out by the factories. Hazard notification; the contractor must submit a construction application before construction, if there is a high-risk operation, it must submit a high-risk operation application, and the responsible unit and the work safety department will implement joint control; the plan begins to handle the contractor's safety and security assessment, and the performance is excellent. The contractor will award the medals, and the worst will ask their supervisors to report the improvement plan; they hope to continue to improve the performance of the contractors in the healthy competition.
8. Work safety education and training
Longteng Optoelectronics is committed to providing employees with a healthy and safe working environment. To ensure the safety of employees, we will continue to strengthen the safety and education of employees and contractors, and provide a series of environmental safety training courses to improve the safety of employees. Environmental awareness, the course mainly includes ERT member professional skills training, newcomers hazard training, contractor safety training.
9. Gong'an Environmental Protection Activities
In order to promote the concept of “human artificial security” and improve the employees' awareness of environmental protection, Longteng Optoelectronics actively organizes various environmental protection activities, including ERT competition, safety knowledge and question and answer, and jointly organizes fire safety literature with government units. Performances, etc., have greatly promoted the enthusiasm of the employees to participate in the work safety activities, and achieved good safety knowledge promotion results.
Looking to the future: Longteng Optoelectronics brings new technology to CES 2019
